格莳国际Growshine：上力重工 3.0SY型叉车参数配置_工程机械设备信息_工程机械

格莳国际Growshine：上力重工 3.0SY型叉车参数配置

广数供应链运营团队, 28 01月, 2025，浏览：次

特性 Characteristic	1	型号Model					CPC20SY/CPCD20SY	CPC25SY/CPCD25SY		CPC30SY/CPCD30SY
	2	动力形式Power type					柴油 Diesel
	3	额定载荷Rated capacity				kg	2000	2500		3000
	4	载荷中心距Load center				mm	500
	5	起升高度Lift height				mm	3000
	6	货叉尺寸Fork size			L×W×T	mm	1070×122×40			1070×125×45
	7	门架倾角Mast tilt angle前倾/后倾F/R				º	6/12
	8	最小转弯半径Turning radius				mm	2230	2268		2400
	9	最小离地间隙Ground clearance				mm	100			130
	10	安全架高度　Overhead guard height				mm	2140			2170
	11	前悬距Fork overhang				mm	472	477		505
性能 Performance	12	最大行驶速度(满载) Max driving speeds (with load)				km/h	20			20
	13	最大起升速度(满载) Max lifting speeds (with load)				mm/s	480			440
	14	最大爬坡能力　Max grade ability with load				%	20			20
尺寸 Dimensions	15	全长（不带货叉）Overall length (without forks)				mm	2595		2602	2740
	16	全宽Overall width				mm	1200			1280
	17	货叉最大起升时高度（带挡货架）Overall height fork raised (with backrest)				mm	4030			4135
	18	门架高度Mast height				mm	2090			2150
底盘 Chassis	19	前轮Front tyres					7.00-12-12PR			28×9-15-12PR
	20	后轮Rear tyres					6.00-9-10PR			6.50-10-10PR
	21	轴距Wheelbase				mm	1645			1690
	22	轮距Tread		前轮/后轮Front/Rear		mm	970/950			980/980
	23	自重Self weight				kg	3500	3800		4400
驱动 Drive	24	蓄电池Battery电压/容量Voltage/Capacity				V/Ah	24/60
	25	发动机 Internal Combustion Engine	型　　号Model				LD495 (4JG2)
	26		额定功率Rated output			kw/r.p.m	40/2600 (44.9/2450)
	27		额定扭矩Rated torque			N.m/r.p.m	174/2000 (186.3/1800)
	28		缸　　数No.of cylinde				4
	29		排量Displacement			L	2.977 (3.059)
	30		燃油箱容量Fuel tank capacity			L	55
	31	传动 Transmission	档位前/后number of speed F/R				2/2手动换档(1/1动力换档) Power shift T/M