格莳国际Growshine：宣工 T165-1  推土机参数配置

T165-1T165-1推土机性能简介T165-1 BulldozerT165-1推土机系半刚性悬挂、机械传动、液压操纵的履带推土机。可用于道路修筑、水电工程、农田改造、港口建设矿山开发及其它建筑工程项目的土石方作业。T165-1 bulldozer is semi-rigid suspended, power shift, hydraulically controlled and track-type. It is applicable for road construction, water and electricity engineering farmland leveling, port building, mining and other engineering conditions. 主机性能参数 Main specifications 外形尺寸(长×宽×高) 　5336×3297×2882 mm (直倾铲) 5336×3726×2882 mm (角铲)使用质量 　　　　　　　16.9t(直倾铲)；17t(角铲)飞轮功率 　　　　　　　121 kW最大牵引力 　　　　　　 132.5 kN（直倾铲）；133.3kN（角铲）(有效牵引力取决于机重和地面附着性能)接地压力（使用质量） 64.4KPa最小转弯半径　　　　　　　3.9 m最小离地高度 　　　　　　352.5 mm坡行角度　　　　　　　　　纵向 30度　　横向 25度单铲容量 4.5 m³(直倾铲);4.9m³ (角铲)Overall dimensions (L×W×H) : 5336×3297×2882 mm (straight) 5336×3726×2882 mm (angle )Operation weight: 16.9t(straight);17t(angle )Flywheel power: 121kWMax. drawbar pull: 132.5 kN（straight）；133.3kN（angle）(The efficient force depends on weight and ground surface adherence)Ground pressure (at operating weight): 64.4KPaMin. ground radium: 3.9 mMin. ground clearance: 352.5 mmGrade ability: Straight 30°　　 Side 25°柴油机Diesel engine 制造厂家： 潍坊柴油机股份有限公司 型号 WD615T1-3B形式 　　　　　　 直列、水冷、四冲程、增压、直喷缸数--缸径×行程 　 6-126×130总排量　　　　　　 9.726L 额定转速 1800 r/min标定功率 130 kW最大扭矩/转率 870N·m/1200-1300rpm燃油消耗量（标定功率） ≤225 g/kW·h机油消耗量 ≤1.8 g/kW·h许用海拔 ≤4000m冷却方式 闭式循环水冷却启动方式 24V电启动Manufactured factory: WEIFANG DIESEL ENGINE CO.,LTDModel: WD615T1-3BType: straight line, water-cooled, with four stroke, pressure boost and direct injectionCylinders Number-bore diameter×travel distance: 6-126x130mmDisplacement: 9.726 L Rated RPM: 1800 r/minRated power: 130 kW Max. torque 870 N·m/1200-1300 rpmFuel consumption (at rated working condition) 225 g/kW·hoil consumption: 1.8 g/kW·hAdmissible altitude ≤4000mCooling method: closed circulation water cooled Starting method: electrically starting at 24V pressure 制造厂家： 上海柴油机股份有限公司 型号 G128ZG8形式 　　　　　　 直列水冷四冲程增压缸数--缸径×行程 　 6-135×150总排量　　　　　　 12.88 L 额定转速 1800 r/min标定功率 130 kW最大扭矩/转速 838 N·m/1260 rpm燃油消耗量（标定功率） 224 g/kW·h机油消耗量 0.7 g/kW·h许用海拔 ≤4000m冷却方式 闭式循环水冷却启动方式 24V电启动Manufactured factory: SHANGHAI DIESEL ENGINE CO.,LTDModel: G128ZG8Type: straight line, water-cooled, with four stroke, Cylinders Number-bore diameter×travel distance: 6-135x150mmDisplacement: 12.88 L Rated RPM: 1800 r/minRated power: 130 kW Max. torque 838 N·m/1260 rpmFuel consumption (at rated working condition) 224 g/kW·hoil consumption: 0.7 g/kW·hAdmissible altitude ≤4000mCooling method: closed circulation water cooled Starting method: electrically starting at 24V pressure主离合器与变速箱Main clutch and transmission主离合器为常开式，多片湿式粉末冶金摩擦片，液压助力操纵。变速箱采用常啮合，斜齿轮传动，结合套换档，双杆机械操纵。前进五档，后退四档。 行驶速度：（柴油机1800r/min时理论速度）前进：一挡 2.5km/h 后退：一挡 3.5km/h 二挡 3.3km/h 二挡 4.6km/h 三挡 5.7km/h 三挡 7.9km/h 四挡 7.5km/h 四挡 10.5km/h 五挡 10.6km/hThe flywheel clutch is constantly disengaged with muti-powder-metal discs, which is operted by hydraulically boosting,.The transmission is mechanical double levels controlled with constantly meshed helical gears, and coupling sleeve shift. It has five speeds FORWARS and four speeds REVERSE .Travel speed (in theory 1800r/min engine speed)Forward Reverse First speed 2.5km/h First speed 3.5km/hSecond speed 3.3km/h Second speed 4.6km/hThird speed 5.7km/h Third speed 7.9m/hForth speed 7.5km/h Forth speed 10.5km/hFifth speed 10.61km/h转向与制动Steering and braking转向离合器为湿式、多片、粉末冶金摩擦片、弹簧压紧、液压分离。制动器为湿式、浮动、双向带式、脚踏式机械操纵.The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.The brakes are oil, two-direction floating band with mechanism foot pedals。 最终传动Final drive两级直齿轮减速，浮动油封密封，链轮采用组合式，便于维修。The final drives are double reduction with spur gear and segment sprocket, which are sealed by floating oil seal for easy service.行走系统Undercarriage system行走架为槽钢焊接矩形截面，八字梁型式。支重轮、托链轮、引导轮均装有密封性好、寿命长的浮动油封。支重轮（每侧） 单边 四个 双边 二个 托链轮（每侧） 二个引导轮（每侧） 一个履带型式 单履齿组合式履带涨紧型式 液压涨紧节矩 203 mm履带板数（每侧） 38 块履带板宽 500 mm履带接地长度 2570 mm密封和润滑履带▲该履带的节距、履带板数、履带板宽与普通的履带相同。Inner and outer beam of track roller frame are rectangular section “八”frame .Track roller , carrier roller, idler are mounted with long life well sealed Duo-cone floating ring well sealed Duo-cone floating ring seal.Track roller (each side):Singe flange 4Double flange 2Carrier roller(each side): 2Idler (each side) 1Type of track: single grouser combinedTension mode of track: hydraulicPitch: 203mmNumber of shoes(each side) 38 piecesWidth of shoe 500mmLength of track on ground 2570mmSealed and lubricated track ▲The pitch , numbers and width of track shoes are the same with the general track.工作装置液压系统Implement hydraulic system由装置油泵、液压油箱及各种阀、油缸、滤油器和管路组成。油泵型式 齿轮油泵油泵型号 CBF-E100A （反）系统流量 180 L/min 系统压力 11.76 MPa 单阀（内置）：用于角铲、推煤铲。可实现铲刀油缸的提升、封闭、下降、浮动。双阀（内置）：用于直倾铲。可实现铲刀油缸的提升、封闭、下降、浮动，同时实现侧倾缸左侧倾、右侧倾、封闭。双阀（一个内置、一个外置）：用于角铲、松土器。可实现铲刀油缸的提升、封闭、下降、浮动，松土油缸可实现提升、封闭、下降。三阀（二个内置、一个外置）：用于直倾铲、松土器。可实现铲刀油缸的提升、封闭、下降、浮动，同时实现侧倾缸左侧倾、右侧倾、封闭。松土油缸可实现提升、封闭、下降。Hydraulic system of the implementIt consists of implement pump , hydraulic tank and various valves , cylinders , filters and lines . Pump type gears oil pumpPump model CBF-E100A(reverse)System output 180L/min System pressure 11.76MPa Single valve(built in):used in angle blade, coal pushing blade to control lift, hold, lower, float for the blade cylinder.Double valve (built in: used in straight blade to control lift, hold, lower. Float for blade cylinder, at same time to realize left tilting, right titling, hold of titling cylinder.Double valve (one built-in, another at outside): used in angle blade, ripper to realize lift, hold , lower, float for the blade cylinder and to realize lift, hold, lower for the ripper cylinder.Three valves: (two built-in, one at outside) used in straight blade to realize lift, hold, lower, float for blade cylinder at same time to realize left titling, right tilting, hold for titling for titling cylinder. Ripper cylinder can move to lift. Hold, lower positions. 驾驶室Cab噪音低、视野宽阔、可调式的司机座椅，并配备电风扇。备有以下驾驶室供用户选用1. 带空调器的驾驶室。2. 翻车保护司机凉棚。3．简易司机凉棚。The cab with adjustable seat features low noise and wide visible range and contains electrical fan.This following different kinds of cabs as follow can be chosen:1. Cab with air-conditioner 2. Cab with Rops 3. Simple structure canopy 加注容量Service refill加注部位 容量（L）水箱及柴油机冷却水 60 柴油机润滑系统用油 25分动箱、主离合器用油 35变速箱、后桥传动用油 90最终传动用油（单侧） 24工作装置液压系统用油 85柴油箱装柴油 230支重轮、托链轮、引导轮用油（每个） 0.35Fill location Capacity(L)Radiator and diesel engine water: 60Lubricating system of diesel engine Oil: 25Flywheel house, main clutch oil 35 ,Transmission, bevel gear case Oil: 90Final drive(each side) Oil: 24Implement hydraulic system Oil: 85Fuel tank Oil: 230Idle track roller, carrier roller, front idler(each) Oil: 0.35推土铲主要参数Blade specifications铲刀型式 角铲 直倾铲 推煤铲Blade Angle Straight Coal pushing铲刀宽度（Width） 3762mm 3297 mm 4240mm铲刀高度（Height） 1140mm 1170 mm 1150mm最大切削深度（Max digging depth）: 400mm 400mm最大提升高度（Max. ground clearance）:1000mm 915mm 1000mm垂直倾斜角(Vertical tilting angle): 9° 8.5° 9° 松土器主要参数：Ripper specifications松土齿数(Number of shand) 3个 1长(length) ： 1580mm 1580mm宽(width)： 2020mm 1090mm高(Height)： 1236mm 1236mm最大松土深度： 550mm 550mm(Max penetration)最大提升高度： 510mm 510mm(Max clearance)注：▲表示可选购物Note: ▲indicates optional parts