TYS165-2湿地推土机

TYS165-2湿地推土机性能简介TYS165-2 LGP Bulldozer TYS165-2湿地推土机系半刚性悬挂、液力传动、液压操纵的履带推土机。特别适用于含水比较高、松软、粘性土质工况下作业。TYS165-2 bulldozer is semi-rigid suspended, power shift, hydraulically controlled and track-type. It is applicable for watery, soft, viscous soil conditions.主机性能参数(标准型：直倾铲)Main specifications (Standard type: straight dozer)外形尺寸(长×宽×高) 　5585×4222×3190 mm (含履刺)使用质量 　　　　　　　18.3 t飞轮功率 　　　　　　　121 kW最大牵引力 　　　　　　 143.4 kN(有效牵引力取决于机重和地面附着性能)接地压力（使用重量） 28.3 KPa最小转弯半径　　　　　　　4.0 m最小离地间隙 　　　　　　382.5 mm坡行角度　　　　　　　　　纵向 30度　　横向 25度Overall dimensions (L×W×H) : 5585×4222×3190 mm Operation weight: 18.3 tFlywheel power: 121 kWMax. drawbar pull: 143.4 kN(The efficient force depends on weight and ground surface adherence)Ground pressure (at operating weight): 28.3 KPaMin. ground radium: 4.0 mMin. ground clearance: 382.5 mmGrade ability: Straight 30° Side 25°柴油机Diesel engine制造厂家 　　　　 上海柴油机股份有限公司型号 　　　　　　 C6121ZG05p形式 　　　　　　 水冷、单行、立式、四冲程、涡轮增压缸数--缸径X行程 　 6-120.7×152.4mm总排量　　　　　　 10.5 L 标定功率 131 kW额定转速 1900 r/min油耗(标定功率时)燃油消耗量 ≤220 g/kW·h机油消耗量 ≤1.2 g/kW·h最大扭矩(≤1400r/min) ≥790N.m冷却方式 闭式循环水冷却启动方式 24V电启动Manufactured factory: SHANGHAI DIESEL ENGINE CO., LTDModel: C6121ZG05pType: water-cooled, single-row, vertical, 4-stroke-cycle, turbo-chargedNumber of cylinders-bore×stroke: 6-120.7×152.4mmTotal piston displacement: 10.5 L Rated RPM: 1900 r/minRated power: 131 kW Oil consumption (at rated power output)Fuel consumption: ≤220 g/kW·hLube oil consumption: ≤1.2 g/kW·hMax. torque (≤1400r/min): ≥790 N·mCooling method: closed circulation water cooling Starting method: by electric at 24V 制造厂家 　　　　 维柴动力股份有限公司型号 　　　　　　 WD615.T1-6形式 　　　　　　 水冷、单行、立式、四冲程、涡轮增压缸数--缸径X行程 　 6-126╳130mm总排量　　　　　　 9.726L 标定功率 131kW额定转速 1900r/min油耗(标定功率时)燃油消耗量 ≤215g/kW.h机油消耗量 ≤1.72g/kW.h最大扭矩(≤1400r/min) ≥790N.m冷却方式 闭式循环水冷却启动方式 24V电启动Manufactured factory: WEIFANG DIESEL ENGINE CO., LTDModel: WD615.T1-6Type: water-cooled, single-row, vertical, 4-stroke-cycle, turbo-chargedNumber of cylinders-bore╳stroke: 6-126╳130mm Total piston displacement: 9.726L Rated RPM: 1900r/minRated power: 131kW Oil consumption (at rated power output)Fuel consumption: ≤215g/kW.hLube oil consumption: ≤1.72g/kW.hMax. torque (≤1400r/min): ≥790N.mCooling method: closed circulation water cooling Starting method: by electric at 24V 变矩器与变速箱Torque converter and transmission变矩器为单级三元件结构。输出动力平稳，具有良好性能。变速箱为行星齿轮传动，动力换档变速箱。前进三档，后退三档。可实现挡位和方向的快速变换。(按柴油机1900r/min时理论速度)行驶速度前进一档 0—3.59 km/h 后退一档 0—4.33 km/h前进二档 0—6.76 km/h 后退二档 0—8.90 km/h前进三档 0—12.37km/h 后退三档 0—14.96km/hSingle-stage, three unites structure torque converter.output power is stable with high performance.Planetary, power shift transmission with three speeds forward and three speeds reverse. Speed and direction can be quickly shifted.Travel speed (in theory 1900/min engine speed ):Forward Reverse First speed 0—3.59 km/h First speed 0—4.33 km/h Second speed 0—6.76 km/h Second speed 0—8.90 km/h Third speed 0—12.37km/h Third speed 0—14.96km/h转向与制动Steering and braking转向离合器为湿式、多片、粉末冶金摩擦片、弹簧压紧、液压分离。制动器为湿式、浮动、双向带式、脚踏式机械操纵，液压助力，可实现转向与制动联动The steering clutch is tighten by pressured springs and separated hydraulically with oil-type, multi-powder-metal discs.The brakes are oil, two-direction floating band with mechanism foot pedals, hydraulic boosted. The steering and braking can be actuated in one control.变速、转向制动操纵：Transmission, steering and braking operation变速、转向制动操纵采用单杆操纵，一个手柄可实现推土机前进三档、后退三档的变速控制和左、右转向及制动控制。The operation of transmission , steering and braking is controlled by single lever . Transmission, left and right steering and braking can be realized for three speeds forward and three speeds reverse by one handle . 最终传动Final drive两级直齿轮减速，浮动油封密封，链轮采用组合式，便于维修。The final drives are double reduction with spur gear and segment sprocket, which are sealed by duo-cone seal行走系统Undercarriage system行走架为槽钢钢板焊接矩形截面，八字梁型式。支重轮、托链轮、引导轮均装有密封性能好、寿命长的浮动油封。单侧支重轮数量 单边4个，双边3个单侧托链轮数量 2个单侧引导轮数量 1个履带型式 三角截面、宽幅、组合式。履带涨紧型式 液压涨紧节距 203 mm单侧履带板数量 43块履带板宽度 1070mm履带接地长度 3020mm密封和润滑履带 （可选购件）该履带的节距、履带板数量、履带板宽度与普通履带相同。The undercarriage is section steel welded track roller frame with diagonalbrace.The track rollers, carrier rollers and front idlers have the same floating seals which are long-service life and seal well.Number of track rollers: 4 single-flange on each side 3 double-flange on each sideNumber of carrier roller : 2 on each side Number of front idler: one on each sideTrack type: triangle section, modular type.Track adjuster type: by hydraulically adjustPitch: 203 mmNumbers of shoe: 43Width of shoe: 1070mmLength of track on ground: 3020mmSealed and lubricated track (0ptional parts) The pitch, number of shoes, width of shoe are the same with ordinary track工作装置液压系统Implement hydraulic system由双联齿轮油泵、先导阀、主阀组及油缸、滤油器和管路组成油泵型式 双联齿轮油泵油泵流量 前泵190 L/min 先导泵 19 L/min系统压力 12 MPaIt consists of two group gear pump ,pilot valve, main valve , cylinders, oil filter and lines.Pump type: two group gear oil pumpPump flow :Front pump : 190L/min Pilot pump :19L/min System pressure: 12MPa底盘液压系统Basic hydraulic system 油泵型式 齿轮油泵油泵流量 135 L/min系统压力 2.35MPaPump type: gear oil pumpSystem output: 135 L/minSystem pressure: 2.35MPa驾驶室Cab噪音低、视野宽阔、可调式的司机座椅，并配备电风扇。备有以下驾驶室供用户选用1. 带空调器的驾驶室。2. 翻车保护司机凉棚。3. 防翻架。The cab with adjustable seat features low noise and wide visible range and contains electrical fan.The different kinds of cabs as follow can be chosen:1. Cab with air-conditioner 2. Cab with Rops canopy3. Rops. 加注容量Service refill加注部位 容量（L）水箱及柴油机冷却水 60 柴油机润滑系统用油 27.5分动箱、变矩器 变速箱、后桥传动用油 95最终传动用油（单侧） 24工作装置液压系统用油 80柴油箱装柴油 285支重轮、托链轮、引导轮用油（每个） 0.35Fill location Capacity(L)Radiator and diesel engine water: 60Lubricating system of diesel engine Oil: 27.5Flywheel house, Torque converter ,Transmission, bevel gear case Oil: 95Final drive(each side) Oil: 24Implement hydraulic system Oil: 85Fuel tank Oil: 285Track roller, carrier roller, front idler(each) Oil: 0.35推土铲主要参数Blade specifications铲刀型式 （Blade） 直倾铲(Straight) 铲刀宽度（Width） 4222 mm铲刀高度（Height） 1035 mm最大切土深度（Max digging depth）: 400mm最大提铲高度（Max. ground clearance）: 957mm垂直倾斜角Tilting angle: 8.5°铲刀容量（Blade capacity）: 4.5m³松土器主要参数：Ripper specifications松土齿数： 3个长 ： 1580mm宽： 2020mm高： 1236mm最大松土深度： 550mm最大提升高度： 510mmNumber of shank : three Length : 1580mmWidth : 2020mmMax. Penetration depth : 550mmMax. Lifting height : 510mm